Brook Painting Archives

Right tools for the Job!

Before David Arroyo become a Painting Business Owner, were a painter on the field so he consider himself a not ordinary sales person, he does believe importance of knowing the field where you serve, this helping him to believe and train his crews about the need of the right tools for right application.

he’s learned that a good paint job starts with quality materials.

“If you’re going to do it yourself,” says, “the key is correct preparation, and using the right tools and right products.”

To help DIY painters do things right, David put together a foolproof shopping list of the essential supplies. Here you’ll find a good starting point for the average interior paint job that doesn’t require too much damage control or problem solving for difficult surfaces. Many of these products will be found at independent paint specialty stores, as opposed to big box home improvement centers.

Wall preparation supplies

After thoroughly cleaning the surface you’ll be painting, it may need a little TLC. “If you have holes and cracks, you have to use the right patching material.

There are many different caulks, spackles, and compounds to treat the potential surface problems. Make sure that the one you choose is appropriate, paintable, and also fairly fresh this is why Brook Painting Exterior and Interior Painting is here to help you .

“Don’t use stuff that’s been sitting around for years, cautioning that expired products won’t perform well. He’s had good experiences using the 3M Patch plus primer, as well as Sherwin Williams products, such as the Power house sealant .

For eco-minded prep products, he likes the spackling paste and putty from Crawford’s. When sanding, use sandpaper and make sure to use the correct grit. (For more how-to painting guides, We recommends visiting the Paint Quality Sherwin Williams.)

Tape

When first started his painting business, he remembers there being only three or four types of tape on the market. “Now it’s just tape overload,” he says. “Tape for every type of surface, every type of paint, and every type of application.”

Homeowners need tape to protect certain elements from seepage, like baseboard or the line where the wall meets the ceiling. When choosing a tape, ask yourself how long the tape will be left up—the longer it’s left to stick, the more likely it will allow drips to creep through.

First choice is Frogtape Multi-Surface Painter’s Tape. It’s green as opposed to the typical blue and can be left up to 21 days. He also likes 3M ScotchBlue.

Primer

“Primer is a painter’s friend,” “It can help our jobs look good and take care of problem areas.”

There are many different types of primers, so it’s important to use the right one for your wall conditions. For instance, a grease or water stain on a wall would need the right primer to seal the stain prior to painting. Or, brand new drywall needs to receive primer that seals the surface.

Once you’ve identified any problem areas, read the labels thoroughly to make the right match. “There’s a specialty primer for everything,” We considers Problock from sherwin williamsa good go-to brand for these.

Beyond the specialty versions, Hamberg suggests the following two as good all-around primers for basic interior jobs: Sherwin-Williams Multi-Purpose Primer for its stain-killing capabilities and Rustoleum’s Zinsser Bulls Eye 1-2-3 water-based primer.

“For about 80 percent of the cases of where you need a primer, those would work,” he says, including on surfaces like wood, brick, and metal, as well as drywall and exterior siding. Another good primer for concealing rough spots or “alligator areas” on the exterior of your house is XIM Peel Bond, which is a primer and sealer.

“It’s like paint assurance in a can, Another exterior product to try is Sherwin-William’s Rejuvenate Siding Restoration, which is a combined paint and primer that’s designed for adhesion and smoothing marginal areas.

Sunny Eckerle

Rollers

A paint roller is a great option for covering a lot of wall area rather quickly. It comes in two parts, the roller frame and its corresponding cover. You’ll only need to buy the roller frame once, and then change out the covers according to your paint job needs over time.

You may also need an extension pole to help reach the ceiling or a tall wall area. To start,We recommends purchasing a basic 9-inch frame for your walls, and a smaller 4 ½-inch frame for interior doors, woodwork, and trim.

Covers come in different fabrics—natural, synthetic, and foam—so it’s important to choose a fabric that fits the job and the paint. Use natural fibers with oil paint, synthetic fibers with water-based or latex paint, and a foam roller for high-gloss results.

When choosing woven covers, pick up one that is “non-shed,” says Hamberg. These types of covers are supposed to prevent the roller’s tiny fibers from detaching during the paint application process and getting stuck in the finish. (One trick is to wrap the roller cover in painter’s tape and remove it, in order to eliminate any loose fibers.)

Finally, choose the nap according to the surface texture that’s being painted. “They have everything from ¼-inch nap to 1 ½-inch nap,”. For a smooth surface, such as interior doors and trim, pick a roller cover with shorter pile, such as a ¼ inch or sponge roll.

For a semi-smooth surface, like plaster or drywall, pick up a 3/8-inch nap or a ½-inch. And for a semi-rough to rough surface (like stucco or brick), the best range will be between a ¾-inch nap to a 1 ½-inch nap. We prefers buying rollers from either the Purdy or Wooster brands.

Brushes

Brushes are needed to control the finish, reach difficult areas, and execute touch ups. Hamberg recommends starting with either the Purdy Clearcut or the Purdy Clearcut Elite(both with bristles cut at an angle).

“It mimics some of the natural bristles and lays off smooth,” says Hamberg. Most homeowners will accomplish their needs with a 2-inch brush for trim and a 2 ½-inch brush for walls, and these should work for all different types of paint. We also likes the performance of Corona brushes.

Most important is to clean the brush properly after each use. “Dawn dishwashing detergent probably works the best to get the paint out.

Bucket and grid system

His team utilizes the tray and bucket and grid system “When you’re dipping the roller into a bucket with a grid screen, you’re going to get better absorption of the paint,” says Hamberg. “You want that paint to go into the core of the roller cover, rather than just on the surface.”

Any five-gallon bucket will work. Then just pair it with a grid that fits your roller size (9 inches) and clips onto the outside of the bucket. (There are handheld, quart-size buckets with built-in grids for smaller rollers and brushes.) “You’ll wont have the need of use a tray.

A home’s curb appeal can go a long way. But keeping your home or bussines in pristine condition year after year can be quite difficult, considering that all interior and exterior surfaces will eventually deteriorate.

Fading exterior paint color is the first sign of paint film degradation. However, Atlanta’s top commercial and residential painting contractors admit that people don’t usually notice the changes in the color intensity mainly because fading occurs gradually. This may prevent property owners from implementing the right remedial measures that could stop the deterioration of the wall system.

Preventing Exterior Paint from Fading

Fading should not be confused with chalking. Fading represents the excessive lightening of the paint color especially on the surfaces exposed to sunlight. Chalking, on the other hand, refers to the formation of a powdery residue on the wall surface as a result of a chemical reaction in the paint film.

Although all exterior surfaces inevitably fade over time, here are four simple ways to ensure your business puts its best face forward and keeps it on for many years to come.

Evaluate the things you cannot change – One of the things you cannot change is the position of your building. To reduce the adverse effects of different weather elements, always opt for paint products that can work harmoniously with the environmental factors which exert a heavy toll on your building. If your commercial property gets a lot of direct sunlight, for instance, you should choose light paint colors, which have been proven to absorb less sunlight than darker shades. Aside from color variations, wall paints also vary in terms of sheen. A higher gloss finish will reflect more light compared to flat paint, reducing the amount of light a paint color may otherwise absorb. The amount of UV light absorbed by a paint product dictates how long a paint job will last.
Choose fade-resistant paint – Though it may seem obvious, opting for fade-resistant paint is one of the few things you can do to avoid fading exterior paint color. The best fade-resistant paints contain high-quality pigments and a sufficient amount of binder, which binds the pigment particles to the other ingredients to form a durable paint film. In addition, the binder ensures good adhesion between the paint film and the wall surface. As less expensive exterior paints often contain low-quality ingredients and lower volume concentrations of pigments and binders, they usually start to deteriorate after only several months from the application. As a general rule, high-quality acrylic latex paints have better color retention compared to oil-based paint products.
Consider the quality of paint products – Paint technologies and products have evolved considerably over the past years. Nowadays, the type and quality of paint systems have a dramatic impact on the overall appearance, performance and service life of an exterior paint job. Adequate surface preparation along with the correct application of a high-quality paint product can help you avoid premature paint failure in the form of fading exterior paint colors, bubbling, peeling and cracking paint, efflorescence, mold growth, dry rot, etc. This will limit the maintenance and repair requirements, reducing your operating expenses.
Don’t use paints prone to fading – Inorganic pigments like tans, beiges and browns are more stable on exterior surfaces than certain organic colors. As an example, bright reds, blues and yellows are particularly vulnerable to UV radiation and consequent fading. Using alkali-sensitive paints on highly alkaline surfaces like new masonry is another mistake that can lead to fading exterior paint color. Also, tinting certain types of paints or over-tinting a paint product may cause the paint to fade prematurely.

At Performance Painting Contractors, one thing we cannot stress enough is the importance of timely maintenance and repairs. The moment you see fading exterior paint, small cracks, peeling paint, mold growth or dry rot, give us a call at 678-349-4988 . Atlanta’s painting contractors to paint the exterior or interior of your company may seem like a big expense, it is nothing compared to what you might pay later if a paint job isn’t up to the mark.

Right tools for the Job! For a interior painting Job